Menu
Menu
EPHESUS model 3 brush washing machine standard 2.50mt. it is at the height of washing and drying, also optionally
it is produced at a washing and drying height of 3.00mt. The washing width is 2.20mt. it is at its standard.
Ephesus a november a modular chassis assembly, the optional components can be easily installed at any time.
It can wash in 10 different programs with features that can be added according to process differences. Thanks to the numerators located in the digital display, it is possible to see how many vehicles are washed in which program and this page can be encrypted by the operator if desired.
The average washing capacity is 24 vehicles / hour, the average washing capacity is 14 vehicles /hour. It provides very precise washing on different types of vehicle surfaces with Horizontal and Vertical Brushes with Digital Printing Control.
Mechanical motion control of all brushes is with timing belt system and Inverter speed is frequency controlled
Brushes and car system Overlapping system bidirectional vertical brush unit; Power control ( digital power printing control) Precise and efficient washing of different types of vehicle surfaces is achieved with system brushes.
It was created with a group of cars with a belt system for moving vertical brushes together in front of and behind the washed vehicle. The horizontal brush up and down movement accompanying this group was also created with the same system.
It is a washing robot that sprays water by rotating with its own pressure at a pressure of at least 70-100 bar to remove the heavy dirt layer from the sides and wheels of the vehicle. Technical Feature: The unit is built with steel construction and profiles, mounted on the main chassis, the washing distance is fixed according to the vehicle to be washed.
Water Spraying Method: The washing system for washing the recessed and protruding parts of vehicles consists of special V-jet nozzles placed on a plate that can spray water by rotating. Nozzles are mounted on automatic Turbo-Cleaner pressure registers that can rotate with water pressure. Nozzles can spray water at any angle according to the vehicle bodywork.
Water Spray Method: The v-jet mounted on the sleeves located on the pipes sprays water and chemicals onto the surface of vehicles at a certain angle and at a pressure of 4 bar with special nozzles. Water is supplied to the unit by the pump group.
The varnish is supplied to the water line by a special electric proportional dosing dosing pump. The polish dosing pump is a pump of Italian origin that operates automatically with an electric control system and can be adjusted to the desired dosage amount.
The chassis washing system sprays water with a pressure of 7.5 Bar and cleans the thick layer of dirt under the vehicle.pressurized water sprayed with sequential nozzles that move automatically to the right and left provides effective cleaning.
DRYING UNIT
The car side surfaces that have been polished after washing are dried with right-angle fans fixed on the machine foot columns. With photocell-controlled up-down horizontal drying, the vehicle top profile is dried by following line–by-line at a distance of about 20cm.
DIGITAL TURKISH OPERATOR PANEL All menus are in Turkish. Thanks to the numerators located in the screen, you can see how many vehicles are washed in which program, and if desired, this page can be encrypted by the operator. Ease of fault detection, signaling with address indication. 10 Different program forms with the ability to activate and activate optional equipment.
BRUSHES AND CAR SYSTEM
Brushes and car system; Overlapping system bidirectional upright brush unit Power control (digital power printing control) Precise and efficient washing of different types of vehicle surfaces is achieved with site brushes. It was created with a group of cars with a belt system for moving vertical brushes together in front of and behind the washed vehicle. The horizontal brush up and down movement accompanying this group was also created with the same system.
Ephesus Brush Car Washing Machine, All System Features and Data Table.
IN THE FIELD OF CAR WASHING SYSTEMS
Our products are produced at the production quality level with international CE and TSE certificates under the name of “TÖZMER” brand, which is a world brand with many models and options. Car wash advanced technological systems in the field of hardware and software designed and developed with extensive R & D work from a technological infrastructure with very functional bar accessories, our products are produced with a wide service network, our company has become a global brand.
Address : Oğlananası Atatürk Mah. Saim Çıkrıkçı Cd. No: 118 Menderes / İzmir – Turkey
Pohone +90 232 257 64 17
Pohone +90 232 257 52 80
Fax +90 232 257 66 83
info@tozmermakina.com
sales@tozmermakina.com
© 2021 TÖZMER MAKİNA LTD. ŞTİ.
